High Precision Steel Reinforced Polyurethane Belt Drive

New Arc-Power design belt
Reduced noise and less vibration
Zero backlash meshing of belts and pulleys
High speed applications with lengths up to 12 meters
Self-tracking
Increased thrust power
Improved linear repeatability

Built in Linear Ball Rail Guide System

Smooth operation with high stiffness and moment capacity
Low friction
Supports high loads in most any mounting configuration
Long life self-lubricating linear bearings

Built in Low Backlash Planetary Gear Reducers

No motor interface adapters required
No shaft couplings
Reducers can be adapted to most any motor
 

Dual tooling plates
Optional mounting configurations
High speed applications
Available in 16, 20, 24 and 32 pitch gear sizes
AGMA rated gear system
Smooth operation
Compact design
Ease of maintenance
Guide shafts for moment loading
Proximity switch ready
End of travel stop pads

Benefits

Four flouroppolymer composite bushings allow two hardened precision ground shafts to move smoothly while supporting the tool plates with attached loads, providing rugged precise linear motion and control
Internal lubrication for guide shafts and gear rack are supplied for maximum life, bushings are virtually impervious to contamination
Anodized aluminum alloy tool plates and body are supplied with a combination of tapped and counter-bored holes for easy attachment of loads and mounting
Standard NEMA 23 motor mounting on size 2 and 3 actuator and NEMA 34 on the size 4 actuator, other motors can be easily mounted by means of adapter plates
 

High Precision Ball Screw Drive

Precision rolled ball screws
Optional ground ball screws
Stainless steel sealing strip cover
High accuracy applications
High thrust capacities
Available in 5, 10, 20 and 25 mm leads (inch series also)
ACME lead screws are also available for less demanding applications
Smooth operation
Compact design
Non-rotating nut and extension rod
Ease of maintenance
Adjustable mounting feet
Add-on glide shafts for moment loading